<< Click to Display Table of Contents >> Navigation: Features and Operations > Data and Information > Information > MTM/GD&T Information |
MTM/GD&T Information identifies and displays information associated with the Moves, Tolerances, Measurements or extracted GD&T callouts in an assembly or sub-assembly. MTM/GD&T Info can also be accesses with the RH-click command in the Model Navigator. |
1.Select MTM/GD&T Information.
2.Select the desired assembly or sub-assembly.
3.Use the Type: drop-down list to display the desired routines.
4.For all routines, you may double-click on a routine to open it for editing.
5.Refresh updates the Information dialog window with any changes that have been made.
6.Summary opens a window displaying information about a selected (highlighted) routine.
7.Display of the dialog can be sorted based on each column.
8.Close exits the Information dialog.
•An Index number •The Move Name •The Parent Part the move is located within •The Type of move •The Move Parts Once a move has been selected (it will be highlighted). Its point coordinates and offsets can be displayed. •Check the Show Coord box to display the current coordinates of both the object and target points. •Check the Show Diff box to display the difference between each pair of coordinates. The measure in the MTM Info dialog does not take into account the direction used in the move. |
---|
•An Index number •The Name of the tolerance •The Parent Part the tolerance is located within •The Type of tolerance •The Range of Value
|
---|
•An Index number •The Measurement Name •The Current value •The Nominal value •The Lower Spec Limit (LSL) •The Upper Spec Limit (USL)
|
---|
•An Index number •The Name of the extracted GD&T •The Parent Part the callout is located within •The Type of GD&T callout •The Range (if applicable) |
---|