Export Format change log

<< Click to Display Table of Contents >>

Navigation:  Appendix > Previous Versions of 3DCS >

Export Format change log

3DCS Version 8.0.0.0

1.Changed all Config files to INI from cfg files. (72063) If a Config file exists, 3DCS will read from the Config file. After close, 3DCS will create a new INI file.

a.Changed all Batch Processor to look for INI extensions, instead of CFG files.

2.Excel Export changes:

a.Added the third features information to Excel for the Pattern-Fit move (69239).

 

Added the third features columns to apply to the Pattern-Fit Move.

Excel Create Move Tab

 

3DCS Version 7.9.0.2

1.Excel Report changes (71392)

a.Removed ASCII .39 (') from TableSimu and TableSens ranges

b.Changed the TableSimu range back to Column C, from Column E

c.Removed ASCII .39 (') from TableSense range; fixed the double-measure name.

d.Fixed PicSimu range to show the measure name.

 

Removed ASCII .39 (') from TableSimu and TableSens ranges:

 

7.9.0.0

7.9.0.2

Excel Report_TableSimu_TableSens_ 

Excel Report_7902_TableSimu_TableSens

 

Changed the TableSimu range back to Column C, from Column E

 

Column C_7902

 

Removed ASCII .39 (') from TableSense range; fixed the double-measure name

 

7.9.0.0

7.9.0.2

TableSens_ASCII and Double-Measure

TableSens_ASCII and Double-Measure_7902

 

Changed the PicSimu range to show the correct measure name

 

7.9.0.0

7.9.0.2

PicSimu_7900

PicSimu_7902

 

3DCS Version 7.9.0.0

 

1.Write to Excel/Read from Excel (*.xlsx)

2.Process Capability Database (*.csv)

3.Excel Report - Contributor Percentage

4.Save CMMDev will include Unit line

 

Write to Excel/Read from Excel

 

1.Added columns:

Primary

Secondary

Tertiary

DRF Active

Datum_A_Features

Datum_B_Features

Datum_C_Features

1

Datum_A_Features

Datum_B_Features



Datum_A_Features




 

Added Primary, Secondary, and Tertiary columns and rows to show multiple datum features or continuous datum features in the model.

For Example: in ISO, the DRF could read as A-A|B|C. The Primary column will show Datum A Features twice or how many times specified in the GD&T DRF. (70053)

 

2.Added ASCII 39 (') to all MTM, GD&T, Point and Feature Name columns and Part Name columns. This was to ensure part or feature names with special characters or with numbers were shown correctly in Microsoft Excel/Google Spreadsheet when using Write to Spreadsheet.

 

Excel Feature or Part Name

 

 

Process Capability Database file changes (70437)

 

Changed the DB Version row to 3.1. This row indicates the Delimiter setting and version for 3DCS. New version is 3.

 

PCDB_DBVersion

 

Excel Report - Contributor Percentage

Fixed an issue when creating a Report in Excel, with the 'Show % in the Contributor list' option in the Analysis Options. The report will now show a correct Contributor Percentage value. Also fixed for Comma Delimiter. (70630)

Using the option to 'Show % in the Contributor list', the Excel Report will correctly show the value as a whole percentage. (70279).

 

Excel Report Contributor Precentage

 

Save Simulation as CMMDev

Added the unit line (30 'Unit') when exporting a CMMDev file. (70969)

Example:

/* CODE LEGEND

/* 10 POINT/ MEASUREMENT NAME

/* 11 0 UDL LDL

/* 12 0 NOMX NOMY NOMZ   NOMINALS

/* 13 0 DIRX DIRY DIRZ          MEASUREMENT DIRECTION

/* 20 INDEX DEVX DEVY DEVZ          DEVIATIONS

/* 30 LENGTH_UNIT   i.e. MM, CM, M, KM, IN, FT (MM is assumed if key is not found)

/* key -1 val1 val2 val2  -- -1 means this line is useless

/* CMM DEV File; default extension = .dev

 

DATASET NAME = Product1

DATASET BUILD NAME =

DATASET PLANT NAME = (null)

DATASET PROCESS NAME = (null)

START DATE = (null)

END DATE = (null)

REPORT DATE = (null)

COMMENT 1 = (null)

COMMENT 2 = (null)

COMMENT 3 = (null)

 

30 IN

 

10 Pt1

11 0 +1,000000 -1,000000

12 0 +70,811335 +0,000000 +0,000000 +70,000000

13 -1 +1,000000 +0,000000 +0,000000

20 1 +0,000000 -0,036247 -0,183488 +0,133466

20 2 +0,000000 -0,408188 -0,142515 +0,006257

20 3 +0,000000 +0,094957 +0,016222 +0,012113

 

 

3DCS Versions: 7.7.0.3, 7.7.1.1, 7.8.0.0

 

File Formats

 

1.Monte Carlo Analysis: Statistics Row (*.csv)

2.GeoFactor Analysis: Statistics Row (*.csv)

3.Contributor Analysis: RSS (*.rss)

4.Write to Excel/Read from Excel (*.xlsx).

Changes of 3DCS export formats_7711_7800_img1

 

 

1.Monte Carlo Analysis: Statistics Row (*.csv)

7.8.0.0 - Enhanced Feature Measure

Added details about Enhanced Feature Measure

Example: ","Enhanced Feature Measure","ON","Exact","OFF","Grouping","OFF

Changes of 3DCS export formats_7711_7800_img5

Enhanced: ON (Requires a Mechanical License)

Exact: ON/OFF – Changes how the Feature Measure measures between features

Grouping: ON/OFF – Changes the Target feature list to Grouped or one feature; this may be removed in 7.8.1.0

Added Estimated Pp/Ppk Columns

","Est.Pp","Est.Ppk",

Changes of 3DCS export formats_7711_7800_img2

7.7.1.1 – No Changes

 

Separater

 

2.GeoFactor Analysis: Statistics Row (*.csv)

 

7.8.0.0 - Enhanced Feature Measure

Added details about Enhanced Feature Measure

Example: ","Enhanced Feature Measure","ON","Exact","OFF","Grouping","OFF

Changes of 3DCS export formats_7711_7800_img5

Enhanced: ON (Requires a Mechanical License)

Exact: ON/OFF – Changes how the Feature Measure measures between features

Grouping: ON/OFF – Changes the Target feature list to Grouped or one feature; this may be removed in 7.8.1.0

 

 

7.7.1.1

Changes of 3DCS export formats_7711_7800_img4

Added “_gf” to the title name (*_gf.csv)

replaced Entry “Dcs” by 3DCS version,release information and Copyright (similar to Monte Carlo Statistics Row and Contributor RSS)

oExample: "Variation Analyst 3DCS CAA V5-6R2020 SP3 HF6 [01-21-2021.17.00] 64Bit Based 7.7.1.1  Copyright(c)2003-2020 By Dimensional Control Systems, Inc."

Line added for *.hlm data file (source)

 

Data File   hlm_file_name   date   time   size   size_bytes

hlm_file_name: Path and file name of hlm file (source file)

date: creation date of hlm file

time: creation time of hlm file

size: “Size”

size_bytes: size in bytes of hlm file

 

Example: "Data File";"c:\DCS\Work\DCS_V5\7_7_1_0_R30_VA\DCS\DCS_V5\analysis\Lesson6.hlm";"04/22/2021 ";"10:32 ";"Size";"22198"

 

Line 4: Model File - fixed issue: data fields are now filled correctly

 

Example: "Model File";"C:\Daten\02_Support\Airbus\210422_Formate\Testmodel\Lesson6.CATProduct";"04/22/2021";"10:28";"Size";"278144";

Line 5: Model Information - fixed issue: data fields are now filled correctly

 

Example: "Model Information";"Part";"4";"Move";"2";"Tol";"1";"TotalMeas";"3";"GDT";"28";"Pt";"26";"SurfNum";"30";"CadPtNum";"739";"Length Unit";"mm";"Angle Unit";"deg";"Force Unit";"N"

Line 7 to 9: Model Settings - fixed issue: data fields are now filled correctly

 

Example:

"Tol Scale";"+1,000000";"Six Sigma Z0";"+1,500000";"Calculate Failed";"OFF";"HlmRunAtMedian";"ON"

"GDT Standard";"ASME";"DRF Method";"Ls LCS";"GDT Dev Method";"RootSumSquare";"Cylinder Threshold";"+1,653470";"Mesh Large Faces";"ON"

"Linear Type";"Normal";"Circular Type";"RightSkew";"Angle Type";"Uniform";"Size Type";"Normal";"Meas Sigma Num";"+3,000000";"Min Truncation";"OFF";"Max Truncation";"OFF";"Datum Shift";"OFF";"Decompose At Each Run";"OFF";"ThreadNum";"4"

Information for line 11:

Since the Geofactor analysis is equation based and on the Monte Carlo method, there is no number of simulations, no seed number, and no fail number.

Example: "Total Run";"0";"Initial Seed";"0";"Fail Number";"0"

 

7.7.0.3

Changes of 3DCS export formats_7711_7800_img3

 

 

3.Contributor Analysis

 

7.8.0.0 - Enhanced Feature Measure

Added details about Enhanced Feature Measure

Example: ","Enhanced Feature Measure","ON","Exact","OFF","Grouping","OFF

Changes of 3DCS export formats_7711_7800_img5

Enhanced: ON – Requires a Mechanical License

Exact: ON/OFF – Changes how the Feature Measure measures between features

Grouping: ON/OFF – Changes the Target feature list to Grouped or one feature; this may be removed in 7.8.1.0

 

7.7.1.1 Header: The header is different depending on whether the contributors are displayed per feature or per tolerance. This seems to be an issue in release 7.7.1.1.

Contributor: per Tolerance

 

Changes of 3DCS export formats_7711_7800_img8

Contributor: per Feature

Changes of 3DCS export formats_7711_7800_img9

Contributor List per measurement

Changes of 3DCS export formats_7711_7800_img10

Adjusted information for 2nd part of tolerance (Rand#2) for Floats, Circular tolerances, and location-type GD&T (7.7.1.1 -68454)

Range and offset values are now in the same column.

 

Added Random#2 for Plus and Minus

If “Maximum Number of Rng/Off to Show” bigger than 1 and Plus and Minus are activated in the Analysis Options then the values are exportet in RSS file as well.

For Angle Range = 360 the Plus/Minus values will be +180/-180.

 

Added CWCR% column:

Optional CWCR(%) Column will be exported as well if it is activated in the Analysis Options.

 

7.7.0.3 Header: The header is the same whether the contributors are displayed per feature or per tolerance.

 

Changes of 3DCS export formats_7711_7800_img6

Changes of 3DCS export formats_7711_7800_img7

 

Separater

 

4.Write to Excel/Read from Excel (*.xlsx)

 

Added a column to the GD&T tab called Feature Type

 

7.8.0.0 -

Changed the columns to be "#Feature","Feature Name","Feature Part"

Added "Feature Type" column

Changes of 3DCS export formats_7711_7800_img12

 

7.7.1.1 - Columns in GD&T tab are called "#Surface","Surface Name","Surface Part"

 

Changes of 3DCS export formats_7711_7800_img11