<< Click to Display Table of Contents >> Navigation: Features and Operations > Display > Tree Icons |
Throughout 3DCS's Model Navigator and Tree, Icons will display if they are hidden or shown, activated/deactivated; has a note, or linked to a Process Capability Database. Here is an in-depth look at most of the icons in the Model Navigator.
See Also:
|
Image |
Location |
Name |
Applies To |
Description |
Store Part Locations mask |
Parts and Sub-assembly nodes |
Indicates the part and/or sub-assembly have part locations using the Store Part Location function. |
||
Associated Feature |
Cylindrical Features |
If the selected feature has one or more segments, the second feature will be the Associated Feature to the Main Feature. Though two features will be listed, the Main Feature will act as one feature, combining the two features. The Surface Information and Summary will contain more details. |
||
Label |
Points and Features |
Display the point or feature name (if the point or feature is shown). |
||
Lost Link |
Features and GD&Ts |
The link to the CAD surface or PMI is missing. Use the Feature Wizard to relink. |
||
Model Summary |
Top Level Assembly |
Model Summary is attached to the model. |
||
Part Note |
Part |
Part Note is attached to the Part |
||
Note |
Moves, Tolerances, GD&Ts, and Measures |
Note is attached to the Move, Tolerance, GD&T, or Measure. |
||
Output Off |
Measures |
Measure Output is turned off. The Measure will not be displayed in the analysis. |
||
Process Capability Database |
Tolerances and GD&Ts |
The Tolerance or GD&T is linked to the Process Capability Database. |
||
All |
Hidden |
Parts, Points, and Features |
The Points and mesh created by 3DCS will not be displayed in the graphics. |
|
All |
Deactivated |
Moves, Tolerances, GD&Ts, and Measures |
The Move, Tolerance, GD&T, or Measure will not be applied to the model. |
|
Saved View |
Moves, Tolerances, Measures, GD&T |
User saved a view that will be used in the report image. |
||
Cover Page |
Top Level Assembly |
Cover Page is attached to the model. |
||
Show |
Moves, Tolerances, GD&Ts, and Measures |
Features and label for the Move, Tolerance, GD&T, or Measure will be shown in the graphics. |
||
Extracted |
GD&Ts |
GD&T was extracted from CAD PMI, not created in 3DCS. |