<< Click to Display Table of Contents >> Navigation: Analysis Output > Statistical Analysis > Batch Processor Analysis > What's New in Batch Processor |
8.0.0.1 - October 2023
Batch Processor Previous Releases
Enhancements and Resolved Issues (8.0.0.1)
Monte Carlo•Fixed an issue in Batch Processor to give the same results as the Run Analysis Results. (73249) Report•Running the Batch Processor and creating a Report will contain the MTM and GD&T icons. (73188) |
---|
Enhancements and Resolved Issues (8.0.0.0)
General•Provisions are added to the Batch Script file to set the flag to RSS or Range Control for GD&T Deviation Command. (71182) •The DOE function outputs HLM files as well. (70789) •Batch Processor will support both Config files *.INI and *.CFG. Changed all Config files extensions to INI from CFG files. (72063) |
---|
Enhancements and Resolved Issues (7.10.0.2)
Dialog•Added Regenerate Script File button in the Batch Processor dialog. (70426)
|
---|
Enhancements and Resolved Issues (7.10.0.0)
General•Fixed an issue when saving a DCSSENS_SAVE 3 output option to correctly output the current specified units. (71622) •Fixed an issue with Batch Processor output for HST statistical results to match what was set in the Analysis Summary. (71624) •Fixed the GeoFactor file (*.gf2) from Batch Processor, correcting the Sum of the remaining Contributors % total value in the CSV file. (71631)
|
---|
Enhancements and Resolved Issues (7.9.0.0)
General•GeoFactor Equation-Based Analysis can be generated in batch mode. It is added with DCSSENS_SAVE 3 command line. (66095) •Added command to Save the HST as an HSU file. The HSU will save a form of HST with the specified units in the platform. (70081) •The _HST_RLST extension is removed from the 'save simu as hsu' command.(71078) •Model Variants can now be exported to DOE \ Batch Processor.(68964) CATIA V5•Updated the installation documentation and Batch Processor documentation to also include these CATIA V5 DLLs, if CATIA V5 isn't installed on the PC. (70569)
|
---|
Enhancements and Resolved Issues (7.8.0.0)
General•Users can now run RAW TOL Data in Batch Processor. See an example. (68567)
|
---|
Enhancements and Resolved Issues (7.7.1.0)
General•Enhanced the DCSWork folder to use the Report Directory setting in the Preferences. •Fixed saving the results to an HTML file, in the chart window (Analysis Summary) and with Batch Processor. •Contributor Analysis has been added back to the script file: DCSSENS_CONTRIBUTOR 1 1 sens_file •Fixed the Config settings (DCS_CFG_SETTING) to show four parameters.
|
---|
Enhancements and Resolved Issues (7.7.0.0)
Script updates•Updated Batch Processor information for DOE Settings and Config file settings to run HLM2 as default. oDCSRUNDOE_SETTING isSimuOn isSensOn isGeofOn oDCS_CFG_SETTING threadNum load_flag mag_dev_delta HLM2_isOFF.
|
---|
Enhancements and Resolved Issues (7.6.0.1)
•Corrected Batch Processor with German Regional setting (Comma Delimiter) caused Batch Processor to stop processing when Contributor Analysis was running. (63951) •DCSREPORT_GEN routine is fixed in Batch Processor. •File Name Error with period in the .html report is fixed. (63712) •Missing or an empty SMP files no longer causes SimuMacro or a Run Simulation to crash. (63506) •Fixed a warning in the Batch Processor by removing the unwanted warning message on running the Batch Processor for the second time. (63543) •Added more Return Flags after running Batch Processor: (63321) o0 = No Errors o-1 = SimuMacro calling format failure o-2 = Main License (Analyst License) Error o-3 = Add-On License o-4 = Fail to save, or find Loading Directory (Special characters; numbers; folder path too long) oFailing to load User DLLs will be reported in the Log File.
|
---|
Enhancements and Issues Resolved (7.5.0.0)
•Using the Merge Data function will correctly create a new file with all the data. •Batch Processor now automatically loads user DLL's as needed. •Batch Processor now automatically detects and checks out Compliant or Mechanical model licenses. •Added new batch processor command DCSREPORT_GEN to generate report. •Resolved Batch Processor with DCS GEOF_SAVE flag and German regional settings issue. •GeoFactor result when run through Batch Processor will no more fail if the File path string have space. •Batch Processor now has DCSGEOF_LOAD keyword.
|
---|
Enhancements and Issues Resolved (7.3.2.1)
•Batch Processor now supports running model in separated position. •Batch Processor now returns license error codes in log file.
|
---|