<< Click to Display Table of Contents >> Navigation: Appendix > Previous Versions of 3DCS > Advanced Analyzer and Optimizer |
Enhancements and Resolved Issues
General•In CM Sequence Evaluator the row number is now displayed for the selected moves in the Trials. (64991) •All GD&T Size Tolerance ranges will be applied correctly from the Optimized Tolerance Range. (64792). •CM Sequence Evaluator Inactive moves will have their check-boxes read-only. They will be grayed out, unchecked, and uncheckable.(65119) •Running AAO with Contributors set to "PerPart" will show the results correctly. (67185) |
---|
Enhancements and Resolved Issues (7.8.1.0)
General•Fixed the Pressure Angle Measurement in Gears to show in degrees. (69899)
|
---|
Enhancements and Resolved Issues (7.8.0.0)
Datum Optimizer - a new tool designed to determine the optimal datums from a candidate set with the goal of minimizing the rigid part variation or compliant part deformation.
Sequence Optimizer - a new tool designed to reduce lead and launch time by eliminating or minimizing manual join/clamp sequence studies. The Sequence Optimizer determines the optimal join/clamp sequence from a candidate set of joins/clamps. Users may optimize clamp sequence or joining sequence.Critical Tolerance Identifier (CTI):•Enhanced CTI to function when only Contributor Analysis has been run. (68286) Gear Modeling - is a new Dialog-based utility to facilitate the gear modeling and calculate Angle and Axial Backlash. Collision Detection - Is a new tool which automatically generates Part Distance measurements that calculates the Min Distance, Interference and Clearance between the selected parts. Part Distance Measure - Is a new measure to measure the distance between 2 or more parts between the parts in "From" list and "To" List and gives the minimum distance between them. It internally uses all the meshed features on each part, calculating the distance between each feature and each mesh node. General•Fixed a feature selection error from the MM Dialog.(68455) •Removed the "Default" Drop Dof setting and defaulted the setting to "No".(69126)
Issues Resolved (CATIA V5)
Dialog•Float Angle Random#2 won't change from 360 to 1 when editing or creating a Joint or Constraint type move. (65317)
Issues Resolved (Solidworks)
Dialog•Fixed the Mechanical Help Icon disappearing bug in Solidworks. (68285)
|
---|
Enhancements (7.7.1.0 - December 2020)
Critical Tolerance Identifier (CTI)•The Critical Tolerance Identifier window will apply the Factor Precision to the Range and the measure results. (68000)
|
---|
Enhancements and Resolved Issues (7.7.0.0)
Moves•Nominal Build will build to the Motion Move's Beginning Position. (66142) •The Range and Offset values for Rand 2 will be displayed correctly for Mechanical Moves. (65315) •Model Nominal Position will build the model to Motion Move's Beg_Pos.(64630). •Use Point As option is now hidden in the setting tab for all Joints.(67832) •Revolute and Prismatic Joint will now use Planes to define direction. (67817) •Sub Assembly constraints extraction will automatically create a break Part constraint to make 3DCS Moves work similar to CAD |
---|
General•Critical Tolerance Identifier will now have an option button which allows to edit Precision, Range, Tolerance Cost Factor, Meas SigmaNum •Fixed composite GD&T not having both values in shown in Tolerance Optimizer.Also changed composite profile GD&T with DRF to be treated as location instead of form. (63964) •Moved RSS Range setting from Contributor Analysis Settings in Analysis window to Validation tab in Preferences. This setting controls the display of composite ranges in sensitivity, geofactor, AAO, and Tolerance Optimizer ranges. •When RSS Range is on, fixed the 'Apply ranges to tolerances' in Tolerance Optimizer giving the wrong RSS values. •Removed AAO Gradient step.(65771)
Display•Added a Filter "Measure Name" to GeoFactor Analyzer Dialog which helps the user to view specific measurement results. (63139) Dialog•Remove Rows option will only remove the selected rows from the SBS Dialog. (62667) •Applying Filter in the GeoFactor Analyzer Table will now instantly update the Values in the Dialog (64023) •Fixed composite GD&T not having both values shown in Tolerance Optimizer, Also changed composite profile GD&T with DRF to be treated as location instead of form. •Doing column Descending in the AAO Dialog will no more shifts the rows. (64348) •All the size tolerance will be set as locked in the Tolerance Optimizer by default. (65121)
|
Enhancements •The new Locator Sensitivity Analyzer (LSA) has been added to AAO.
Tolerances: •DCS size tolerances will now correctly update when editing from AAO dialog •GeoFactor and AAO now have options to change the Meas Sigma number used to calculate the measure ranges. Measurements:•Changing the weight value in CTI is saved upon closing the dialog. Dialogs:•AAO dialogs now allow for double clicking on a tolerance or a measure to open their respective dialogs. •Changed AAO dialog "Update Tolerance" to "Update Tolerances" Issues Resolved•resolved geofactor analyzer contributors per part issue. •resolved geofactor analyzer summary page incomplete output issue. 3DCS Advanced Analyzer and Optimizer, MC Based - Version 7.3.1.0 - November 2014Enhancements The log file now contains additional information to use to resolve cases where Min Cost Calculation cannot solve. The %Filter in the CTI dialog is now based on the overall percent contribution.
Issues Fixed Resolved the GeofMean, SimuMean, and Nominal values in the GeoFactor Mean Shift Table not automatically updating. Resolved Analyzer Matrix displaying G Factors in degrees/radian is certain cases. 3DCS Advanced Analyzer and Optimizer, MC Based - Version 7.3.0.0 - July 2014Enhancements Improved the CTI interface by; 1) removing Index column, 2) adding 'Total # at the bottom of the contributions, 3) Moving Weight to the Range column. CTI now displays parent part as default with a check box instead of right-click menu. AAO now sets color coded cells as uneditable. Critical Tolerance Identifier (CTI) now only displays one column of results at a time based on a dropdown list. Analyzer Matrix now sorts by absolute value. Analyzer Matrix now color codes based on Geofactor and Contributor independently. Cost and Quality optimizers have reordered the "Opt Tol", "Max Tol" and "Locked" rows. CTI now auto-sorts tolerance contributors in descending order- the Sort On By option has been removed. AAO now has Mean Shift Contribution sensitivity analysis. AAO now includes multiple methods of grouping contributors to better understand their impact on the results. AAO has improved messaging when multiple instances are open. An analysis progress bar now appears when using the AAO Auto Generate function.
Issues Fixed Resolved AAO CTI Analysis not supporting the option to use the percent contributions and 6-Sigma results from GeoFactor. Resolved AAO not using degrees when measures or tolerances have angular ranges. AAO importing previously saved .sov files issue. Resolved an AAO crash and log file errors. 3DCS Advanced Analyzer and Optimizer, MC Based - Version 7.2.1.1 - November 2012Issues Fixed Resolved AAO crash for model with composite linear tolerances with only one random value issue. 3DCS Advanced Analyzer and Optimizer, MC Based - Version 7.2.0.0 June 2012Enhancements Added a set of Options for AAO. The AAO Matrix now includes GeoFactor Table and Options buttons. 3DCS AAO now has preferences for significant digits under the Options button. Standard header information is now available in the Summary window of the AAO Matrix.
Issues Fixed Resolved AAO Update Tolerance with scale issue.
|
---|