<< Click to Display Table of Contents >> Navigation: Appendix > Previous Versions of 3DCS > Welcome to 3DCS Variation Analyst |
Below are a list of changes, enhancements and resolved issues based on the entire 3DCS suite or a specific CAD system available with 3DCS. Please review the list of changes and don't hesitate to ask about a specific change.
Any text written with a teal highlight refers to any Simulation Output change. In other words, some calculation changes were made to either a distribution, a measurement output or DLL result. This could result in minor changes to a previous Model Simulation output.
Advanced Analyzer and Optimizer
General•Fixed a bug that allowed users to have multiple points or features within the same part by using Find/Replace. (68271) •Corrected Delete Unused Data removing entities that are used in MTMs. (68395) •Fixed an issue where deviation of the slot will now vary in the given Slot direction correctly. (68351) •Fixed an inconsistency in all Platforms how center feature point is created on spheres. (68381) •Adjusted the information shown in the RSS output file: oAligned the Range - Random #2 under the range column. oAdded a Plus/Minus value for diametrical tolerances (+180deg/-180deg). (68454) Analysis•3DCS will show the correct size of a slot in the Move and Slot dialog. Corrected when the slot was defined from two different parts and separated in the CAD. The correct size will be applied before the move in Nominal Build. (68566) •Corrected the Stat Row file. Columns with UTF-8bit characters in a description or measure name will not truncate other columns. (68288) •Fixed an issue with removing Form tolerances (Cylindricity and Circularity) from the Contributor Analysis results. (68506) Sensitivity•GeoFactor Analysis no longer applies a mean shift to measures that have a Position with Datum Shift as a contributor. •Fixed a bug in 3DCS where GeoFactor and sensitivity analysis would not pick up a constant size offset when calculating the clearance used in floats. Features•3DCS will show the correct size of a slot in the move and Slot dialog. Corrected when the slot was defined from two different parts and separated in the CAD. (68566) •Creating a Coordinate Point through the Fast Point dialog will not create an unnecessary surface. (68169) Dialog•Correct measures will be removed from the User Dll measurements list. (68505) •Fixed an issue in LCS with Slot/Tab directions. All MTM dialogs will correctly display the Slot/Tab Associative direction. (68559) •Fix a crash when creating Features Points on an edge in the V-Direction. (68564) •Fix a crash when using Next and Previous functions in the Histogram window. (68469) •Measure highlight from the Analysis Summary Dialog has made little more darker for better display.(65444) •Fixed an issue where Points was not able to be picked twice from the User Dll Move Dialog.(68442) •Added little space in the Analysis window so that the Text doesn't look very close to the border. (68418) •Double clicking a size tolerance entity from the Find/Replace dialog will now correctly open the Size Tol Dialog. (68541) •Selecting MTMs from the RunLog dialog will now open the MTM dialog correctly even with Alias Display On.(68611) •Improved the Show Features and Direction display dialog.(68535) •The 'Switch To' option is added to the User DLL move dialog to help reorder features. (69205) Measures•The Dimensional Distance measure will display the correct built measure values, once the model has been set to its built position. The direction of the measure will be applied after a move has been performed (Nominal Build). (68460). Tolerance•Fixed an issue with removing Form tolerances (Cylindricity and Circularity) from the Contributor Analysis results. (68506) •Fixed an issue with Feature tolerance incorrectly not deviating the features of a slot/tab as a size tolerance. (68560) GD&T•Creating a tolerance that requires a Size tolerance, the tolerance will detect a size has been created on the same feature. The warning 'A size tolerance is required' will not be shown. (68685) •Fixed the crash when trying to open a specific GD&T from the Tree.(68400) Tree•The Relationships Tree will now recognize that a Datum used in a GD&T measure; will appear as Green, as it is not unused (Yellow). (68393) Preference•Added Choral height setting to the Preference that controls the distance between the Cad design and the 3DCS Mesh on non planar features.(68432) •Hot Keys will now work for Preference dialog. Esc will close the dialog and Ctrl+F will activate the Search Bar.(68078) |
Alias Display•Using Find/Replace will also search for a Part name if specified in the DCS Name field of the Edit Part dialog. (68396) GD&T•GD&T Standard will now be extracted from the CAD Parts on extracting the GD&T.(67740) •Creo Angle Dimension will now get extracted into 3DCS.(64631) •Removed the Mixed Units Warning message from Creo as we now handle mixed units model better by using the CAD assembly units to display in all 3DCS dialogs.(63081) •3DCS can now extract GD&T from Inherited Parts. If the Inherited part is updated, doing Update GD&T can extract the Updated GD&T.(64070) •Fixed an issue where the asm level CAD Dimensions was putting the model back to its separated position when closing the deviation dialog.(68327) Dialog•Fixed an issue where the last item can now be reordered correctly from the Organize Group Dialog.(68447) •Fixed all the User DLL dialogs to allow same point selection twice.(68094) Tree•Fixed a issue where the Tree items was not getting pasted multiple times. (68649) Measures•Extract Dim Distance measure will show the current value right after extraction, no nominal build is required.(68569) •Fixed an Issue, While extracting Measure Dim GD&T created on Part instances will now get extracted correctly.(68547) Preferences•The Cylindrical Threshold value will be displayed with units in the Preference dialog. (65970) •Creo Force Measure will now display the units correctly from the Preference setting. (68289) •3DCS Length units is controlled by the CAD Units, user need to change the CAD Length units to see the change in 3DCS Length Units.(68502)
|
---|
General•Added support for NX 1899 Continuous Release. Alias Display•Using Find/Replace will also search for a Part name if specified in the DCS Name field of the Edit Part dialog. (68396) Update Model•Fixed a crash when creating a new assembly and using Update Model. (68526) Report•Part Notes, Summary and Cover page can now be taken correctly from Teamcenter NX.(68199) •Fixed an issue on creating an Excel Report in NX where the png files was not getting saved in the Folder.(68558) Dialog•Fixed an issue where the last item can now be reordered correctly from the Organize Group Dialog. (68447) •Fixed all the User DLL dialogs to allow same point selection twice. (68094) Tree•Fixed a bug in NX that prevented users from saving and reopening a model with Feature Groups correctly. (68699) •Fixed an issue with Copied tree entities could not be Pasted multiple times. (68649) Measures•Extract Dim Distance measure will show the current value right after extraction, no nominal build is required.(68569) Moves•Pattern Components created in NX will no more crash on extracting Constraints.(68708) Preferences•The Cylindrical Threshold value will be displayed with units in the Preference dialog. (65970) •3DCS Length units is controlled by the CAD Units, user need to change the CAD Length units to see the change in 3DCS Length Units.(68502) |
General•Nominal Build, Separate and Deviate speed will not affect if the points turned On.(68064) •Fixed a crash in SW on extracting Distance constraint if the model has more than one configuration.(68483) •Fixed an Issue where activating new Configuration and doing Update Model was deleting the Part Information from 3DCS.(68496) •Box Selection for selecting Points will now work in 3DCS SW.(66890) •Fixed an issue where if a subassembly is rotated it will not build correctly when animated or Nominal built. (68636) Alias Display•Using Find/Replace will also search for a Part name if specified in the DCS Name field of the Edit Part dialog. (68396) Dialog•Fixed an issue where the last item can now be reordered correctly from the Organize Group Dialog.(68447) •Fixed all the User DLL dialogs to allow same point selection twice.(68094) Tree•Fixed a issue where the Tree items was not getting pasted multiple times. (68649) Measures•Extract Dim Distance measure will show the current value right after extraction, no nominal build is required.(68569) Preferences•The Cylindrical Threshold value will be displayed with units in the Preference dialog. (65970) |
---|
Dialogs•Bug fixed so that Auto-Sort will immediately reorder the GD&T in the dialog. (68236) Features•Fix a crash when creating Points on an edge on the V-Direction. (68564) Display•Removed the Histogram display functionality from the Graphics view. (66889) •Fixed an issue to have the Feature Info dialog correctly show the defined units. (65370) •Fixed the Label Transparency setting in Catia to apply the transparency for the Features labels also when an MTM is displayed in the Graphics.(68591) •Features from the Feature Move dialog will now highlight all the features correctly when clicked from the dialog correctly.(68589) |
Issues Resolved (3DEXPERIENCE)
Dialogs•Bug fixed so that Auto-Sort will immediately reorder the GD&T in the dialog. (68236) Display•Removed the Histogram display functionality from the Graphics view. (66889) •Fixed an issue to have the Feature Info dialog correctly show the defined units. (65370) |
---|
Converter (TM v12.30.600)•Converting CATIA V5 assembly (CATProduct) will convert the whole assembly and the parts linked. General•Using Copy and Paste as Instance will correctly paste the instance with the correct features in the MTM/GD&T dialogs. (68376) Alias Display•Using Find/Replace will also search for a Part name if specified in the DCS Name field of the Edit Part dialog. (68396) Dialog •Fixed an issue where the last item can now be reordered correctly from the Organize Group Dialog.(68447) •Added Analysis Mesh color option in MC Edit Part Dialog. (64573) •Added config option to show Analysis Mesh in Wireframe mode in MC Preference Dialog. (64573) •Fixed all the User DLL dialogs to allow same point selection twice.(68094) •Coordinate Point Creation on Edge from Coordinate Point on Solid function will now create the Points correctly from the given input.(68630) Tree•Fixed a issue where the Tree items was not getting pasted multiple times. (68649) |
---|