What's New in version 7.3.2.1

<< Click to Display Table of Contents >>

Navigation:  Appendix > Previous Versions of 3DCS >

What's New in version 7.3.2.1

3DCS Variation Analyst, Multi-CAD 7.3.2.1 - August 2015

3DCS Variation Analyst Multi-CAD is now available on the Windows 7 & 8 on win32 & win64 platforms.

 

Issues Resolved

 

Alias Display:

The Move, Tolerance and Measure dialogs now show the Alias Display name in the title.

When Dominate Direction (FV) is selected for Features and Points, the name will display the vector directions "i,j,k", instead of "X,Y,Z" directions.

The Edit Point dialog and Graphic Window now display the Alias Name for Points and Features.

 

GD&T

Enhanced GD&T and the internal feature move to incorporate an A-B DRF using two or more spheres as primary features.

 

CMMDev2 (DLL):

CMMDev2 set with Constant Values (1 or 2) and performing Deviate to Offset will now only apply the first line of values from the DEV or the CSV files.

Removing a point from the dialog box will no longer cause 3DCS to close unexpectedly.

 

3DCS Preferences:

Datum Shift setting is now default set to Off. Reseting the defaults will remember Datum Shift is set to Off.

 

DCS Converter:

Some system files from TransMagic were missing in the Production Release. This has been corrected and Multi-CAD will now once again convert CATIA V5 files.

 

Color Contour:

Improved the internal process for running Color Contour with larger models.

 

Tolerances:

Resolved Save To Measurements not calculating measurements based on Deviate to Offset tolerance issue.

 

3DCS Variation Analyst, Multi-CAD 7.3.2.0 - June 2015

3DCS Variation Analyst Multi-CAD is now available on the Windows 7 & 8 on win32 & win64 platforms.

 

 

Enhancements

 

Alias Display: Is a new option available in the 3DCS Preferences. This setting allows users to setup a naming convention using terms already available in 3DCS with part names, measurement type, directions and more.

 

Color Contour:

Will now correctly work with Show Graph and Show Sample.

Now has it's own location; from the 3DCS Preferences to the 3DCS Graphics toolbar.

Added Est. Range to the type list and a new option to show a defined Sigma number ('N'STD)

Enabling Show Color Contour option in Edit Part dialog will now gray out the All DCS option. Switching to All DCS option will gray out the Show Color Contour option.

Settings in the color contour dialog now allow for real time update.

Added option to settings to manually set the scale for Color Contour Legend.

Compliant Models are now supported.

Adjusted the text number lines, Autoscale and Manual Scale when using the Color Contour Legend.

The Legend precision default is set to 2, from 4.

The settings now have controls to visualize variation in X, Y, or Z

Color Contour (lines) updates accordingly after setting the Pp value

Shows the direction of the measurement, instead of point direction.

 

GD&T and Feature Move:

Feature moves with a primary axis and a secondary anti-rotate plane (case 2.13) are better supported if the plane is slightly tilted.

When a feature move or a DRF has one primary axis and two secondary axes, the method of alignment is now more accurate.

When a feature move or a DRF has one primary axis and one offset secondary surface, the method of alignment is now more accurate.

Dimension callouts on pairs of spheres are now supported.

In the Range Control GDT Dev Method (for worst case analysis,) bonus tolerance on position callouts on slots is now supported.

Importing parts with embedded GD&T? Please view the section for importing CAD files into 3DCS Multi-CAD.

 

Features and Points:

Creating a Feature Point at the center of the minor radius of a torus has been enhanced to better aquire the correct size.

Improved the feature definition of spheres necessary for improved tolerance and GD&T application on spheres.

If the selected features interfere, the Translate Two Points to the Closest Position routine in the XForm DLL will now move the points to the estimated maximum amount of interference.

 

User DLLs:

Added two new keywords in the Measure Equation (DLL) which will convert the measure results to the Area or Volume units selected in the CATIA Options.

Added a new option to the CMMDEV (DLL) to only deviate a particular sample number.

Cross Product (DLL) is now available to use with 3 new routines.

 

Process Capability Data Base (PCDB):

The default number of parameters in PCDB database file is now 6.

A symbol has been added to tolerances and GD&T callouts in the 3DCS tree indicating if they are linked to the PCDB.

PCDB now indicates tolerance inconsistencies between the model and the database.

 

3DCS File Export:

Part DCSDB2 file will now export the nominal spec limits from the part's point location.

Saving a CMMDev file from a Simulation will now include the diameter size as size deviations

 

Under the Hood Enhancements:

Improved the speed of part deletion, Load Management, etc. for large models.

Added Measure Generator and Mirror to the DCS Tools Toolbar, under the Copy Data function

 

Installation

Installation script now has a digital certificate. Used for defining the company information being installed on the system.

License messages for 3DCS add-ons (Compliant, Mechanical and AAO) have been improved to better describe the issue (out-dated license, can't locate license, etc.)

 

 

Analysis Reporting

 

Sensitivity:

Added a setting to display the contributor's name and value in the graph window.

HLM analysis better supports size GD&T on multiple spheres.

An option is now available to display the overall value when the grouped portion of a composite tolerance is listed in the HLM Analysis.

 

Simulation:

The accuracy of the Skewness calculation has been improved.

Save To, under the Contextual Menu (right-click), now has an option to save all as JPEGs from the Simulation window.

Saving as .RAW file will now show the Seed and Index number.

Removed Analysis Options \ Apply Sigma Num and Est. Percent to All checkbox.  This setting is now the default.

The setting Run Directly is now default set to ON, to improve performance of Compliant Models

GeoFactor and AAO now have options to change the Meas Sigma number used to calculate the measure ranges.

New functions to support Datum Shift analysis have been added to the Worst Case analysis DLL.

Updated these areas of the Analysis Settings:

SigmaNum (based on Histogram)

Datum Shift (On/Off)

 

Appearance and Information

 

3DCS Tree:

Highlighting or selecting MTMs in the 3DCS tree will show their associated points and features.

 

Preferences:

Changed Export zero-based DCSDB2 from Simu setting default to Off or Nominal Based.

HLM Run at Median is now the default setting as it will better predict the contribution to variation.

The Show / Hide Preselection Mesh setting is now off by default.

Datum Shift is now available in 7.3.2.0 with new Example Models and Documentation.

 

Dialogs:

Added Edit/Create Point to the Contextual Menu (Right-click) when right-clicking on a part in the tree

Enhanced all Move, Tolerance and Measure dialogs to share the same "Active" name

Reordered Combination Measure Mode dropdown list.

The Point List is no longer automatically cleared after creating a Point Group.

Added a Description field to Measurement Generator

Spec Study dialog has been slightly improved to be more user friendly.

Move, Tolerance and Measure sequence in their respective MTM list has been optimized for most common utilization.

3DCS feature names have been updated for clearer understanding (Example: DCS Tolerance Optimizer Cost, changed to: Tolerance Optimizer: Cost)

 

Errors and Warnings

Our developers will add errors and warnings to 3DCS, but some don't show or explain what these errors mean. This section was added to detail Errors and Warnings that are available in 3DCS.

Check out the Validate list to see the specific list of Errors and Warnings that show when using Validate_icon Validate.

Changed GeoFactor Update Model selection (under Edit menu) to Update Tolerances; added warning dialog

 

Help and Documentation:

Throughout this Manual, we reference our DE Focus articles that hold additional information about the subject. This material is available on our Community site at http://community.3dcs.com/articles.

Updated information and documentation for Tolerance Wizard (DLL).

 

 

Issues Resolved

 

Color Contour:

Show Color Contour option in Edit Part dialog will now correctly underintensify (gray out) when choosing All DCS option for HSF Color.

The legend will no longer go off the graph window when changing its position. Additionally, it will no longer activate automatically when in a Simulation window.

Lines not updating based on statistic type if show measure option is turned off.

Multi-CAD's Part (nodes) will correctly return to HSF color after its color contour is disabled.

Backplane Culling (3DCS display setting) will no longer effect the Color Contour Legend.

Deviation Control will now correctly show Color Contour, if enabled

 

DCS Converter: (TransMagic 11.01.900)

Multi-CAD will correctly read Options/File settings.

Importing STEP files with embedded GD&T: Import to DCS Converter to delete hidden lines created from the CAD system/STEP file.

Pro-E files with embedded GD&T, along with LR and PMI settings, will no longer crash Multi-CAD.

Importing CAD with units set as inches will no longer duplicate the geometry in Multi-CAD.

Importing CAD files with duplicate names (Points and MTMs); Multi-CAD will correctly generate a new name.

Autodesk Inventor - DCS Converter Option - now supports reading suppressed entities with the latest Inventor Kernel.

Importing JT files will apply the correct coordinate system.

NX9 assembly files will now correctly load geometry.

 

Features:

Resolved nominal feature surface being highlighted instead of the deviated feature surface.

Cylinder, Sphere & Torus features will correctly apply the whole feature when only half of the feature is selected in an MTM.

Resolved the feature point at center of certain spheres losing its radius after saving, closing, and reopening the model.

Resolved feature points on the surface of a sphere being created with the wrong vector.

Resolved dynamic points in mirrored parts unexpectedly being tied to a circle on the first control point.

The Analysis mesh Normal Vectors will now be consistent with the Nominal mesh Normal Vectors.

 

GD&T and Tolerances:

GD&T size tolerance should not have 'Is Dimensioning' setting checked on. (Turned off by default).

Concentricity applied to spheres now deviates their location instead of their size.

Resolved GD&T spherical position deviation issue when applied to a partial sphere.

Resolved Sphere tolerancing issues.

Resolved feature points on the surface of a sphere being created with the wrong vector.

Offsets are now blocked in orientation tolerances and GD&T.

Resolved orientation tolerances and GD&T over-varying when applied to certain planar shapes or sets of planar features with the distribution set to BiMode, Modal, Step, or Uniform.

The MMC/RFS/LMC setting is now editable for Concentricity callouts for models set to the ISO standard.

Zero at MMC callouts are now supported in the Range Control mode.

 

Measures:

Circle Interference (Interference No. type) no longer count hole-pin pairs as interfering when they have less than 0.000000001 mm of interference.

 

Simulation:

Show measure option will correctly toggle labels on/off when a simulation is run.

The analysis window display will correctly run a Simulation while branched with a backslash in its name.

First created Linear Tolerance will no longer have a internal "Null mode", reporting 0 variation from the tolerance.

Resolved crash during simulation due to Equation dll internal measurement reference.

 

File In/Out:

Opening a WT3 file and saving as a WTX file will no longer cause 3DCS to crash

 

User DLL:

Nest Move, with sequential simulation and sensitivity run, internal nominal build; will provide correct calculation.

 

Dialog:

Opening and closing MTM lists will no longer display the error "Close the other dialog box to continue"

Activating and Deactivating part level Tolerances, Moves and Measures will no longer inadvertanly Activate or Deactivate Size Tolerances

 

Excel:

Excel Import will no longer crash 3DCS if used while editing a cell.

 

Views:

Views saved when Nominal Build is used in a branched model will now use the the Nominal Build condition of the branched model instead of the full model.

 

Validation:

If two points are associated to one circle a validation error now appears and an option to remove the second point's link is given.

Resolved repairing errors in solids causing hole/pin information to be lost.

 

Selection:

The user can now use a window selection when Creating Lines in the graph window.

 

Settings:

Users with German Regional Setting will correctly export a .dev file with the expected delimiters available in the file.

 

Analysis:

Resolved Sensitivity with a tolerance with a null mode issue.

Resolved crash during simulation due to Equation dll internal measurement reference.

 

 

3DCS Variation Analyst, Multi-CAD 7.3.1.2 - January 2015

redball Resolved 3DCS Analyst not reading settings from DCS Converter Options \ File settings.  

redball Resolved Simulation Save All .jpgs issue.  

 

3DCS Variation Analyst, Multi-CAD 7.3.1.1 - December 2014

blueball 3DCS Variation Analyst Multi-CAD - Version 7.3.1.1 is now available on the Windows 7 & 8 on win32 & win64 platforms.

blueball New keywords have been added to the Measure Equation DLL to allow the I,J,K values of a point to be used.

blueball DCS Converter settings are now saved in the Config file.

Resolved GeoFactor not including bonus tolerance from Position callouts

 

Add-on Enhancements

blueball 3DCS Mechanical

blueball FEA Compliant

 

Issues Fixed

redball Resolved extra Feature (Position) tolerance contribution being added in GeoFactor and AAO results issue.

redball Resolved imported GD&T reading 0 range value due to German Regional Settings issue.

redball Resolved translator crash when importing NX file with Read GD&T on issue.

 

3DCS Variation Analyst, Multi-CAD 7.3.1.0 - November 2014

blueball 3DCS Variation Analyst Multi-CAD - Version 7.3.1.0 is now available on the Windows 7 & 8 on win32 & win64 platforms.

blueball The Process Capability DB now dialog now supports relative paths.

blueball PCDB Linking dialog "Break Link To DB" button now says "Break All Links to DB".

blueball PCDB "Link To DB" field size has been increased.

blueball Batch Processor now supports running model in separated position.

blueball SimuMacro work directory will now default to using current directory if no path is defined.

blueball Enhanced Feat Tol Orient Deviation Mode.

blueball FlexLM TIMEOUT feature is now supported to release inactive licenses after given time.

blueball Stat Row file is now imported with diameter information.

 

Add-on Enhancements

blueball 3DCS Mechanical

blueball FEA Compliant

blueball AAO

blueball Visualization Export

 

New Functions

blueball DCS Size tolerances can now be linked to the PCDB.

blueball Angle Dimension callouts are now supported.

blueball The X Form DLL now includes the option to move a point to the average of a set of Feature Locator points when a set of features is selected.

blueball The Stat Row DLL now supports diameter size variation.

blueball Batch Processor now returns license error codes in log file.

blueball Visualization Export now has "Label Simulations as Scenarios" setting.

 

Analysis and Reporting

blueball A Feature tolerance set to Group Orient now uses the average of the feature locator points of its features as the center of rotation.

blueball Notes may now be added to GD&T callouts as well as other MTMs.

 

Appearance and Information

blueball A symbol has been added to tolerances and GD&T callouts in the Navigation Window indicating if they are linked to a PCDB.

blueball A symbol has been added to MTMs and GD&T callouts in the Navigation Window indicating if they have a Note written.

blueball A warning has been added to the Run Log if the Step Plane move fails.

blueball A warning now appears for the unsupported case of a Feature move with a single slot-pin pair as the primary features.

 

 

Issues Fixed

redball Resolved crash when highlighting features outside of a branched model issue.

redball Resolved Feature Measure with CadEdges calculation issue.

redball Resolved model slow down and result change with moves with both hole-pin float and logic options set issue.

redball Resolved Feature Move not solving for certain Plane-Axis-Plane cases issue.

redball Resolved One Page Report crashing when used with a saved and loaded HST  file issue.

redball Resolved Model Summary locking up when attempting to edit different summaries from multiple sessions of 3DCS issue.

redball Resolved the PCDB overwriting distributions when set up not to issue.

redball Resolved obsolete text appearing in the Run Analysis dialog issue.

redball Resolved inactive DCS Point size tolerance distributions not updating when Excel Linking is used issue.

redball Resolved an unnecessary warning appearing when canceling a file save issue.

redball Resolved duplicate size tolerance warning issue.

redball Resolved the rate of change calculation issue for cylinder straightness and profile of a line issue.

redball Resolved editing item parameters overwriting item name in PCDB editor issue.

redball Resolved PCDB parameters showing different random numbers than was specified issue.

redball Resolved unsupported slot-pin floating if a Feature move has a hole-pin pair as the primary features and a slot-pin pair as the secondary features issue.

redball Resolved importing CAD file with duplicate part names issue.

redball Resolved incorrect measurement vector in .csv DCSDB2 file issue.

redball Resolved DCS Converter \ "Scale Model for Units" HSF files issue.

redball Resolved Doe Form \ Save as .csv "failed to save" issue.

redball Resolved the Active/Deactivate MTM Settings dialog not appearing for Moves, Tolerances, and Measures issue.

redball Resolved converted measure validation warning issue.

redball Resolved One Page Report HLM and GeoFactor display issues.

redball Resolved Graphics Display Options crash issue.

redball Resolved importing CAD using custom defined DCS Converter Facet Options issue.

redball Resolved Simulation floating performance issue.

redball Resolved range doubled in a new Feature SizeOnly tolerance linked to the PCDB issue.

 

 

3DCS Variation Analyst, Multi-CAD 7.3.0.0 - July 2014

blueball 3DCS Variation Analyst Multi-CAD - Version 7.3.0.0 is now available on the Windows 7 & 8 on win32 & win64 platforms.

 

Add-on Enhancements

blueball 3DCS Mechanical

blueball FEA Compliant

blueball AAO

 

New Functions

blueball Added Distribution, sigmaNum, Skewness and Kurtosis to the Process Capability DB.

blueball Updated the PCDB; Edit Database function.

blueball PCDB right-click menu options have been enhanced.

blueball PCDB now warns user if linked tolerance does not have an associated item in the CSV file.

blueball DCS GD&T now supports Datum Shift.

blueball GD&T callouts now support Rate of Change (Unit Basis) application.

blueball Added GD&T form and orientation refinement fields for composite profile callouts.

blueball The new function to automatically assign origins when multiple dimensional callouts are applied to surfaces is available within the Joint Wizard DLL.

blueball Feature Tolerance now has Group Orient mode to deviate all selected features with grouped orientation.

blueball Added multi-delete and reorder feature for all list-style MTM dialogs.

blueball The MTM List right-click menu On/Off function now toggles the active setting for all items in the list.

blueball The SMP file from the user defined distribution now displays and uses the relative file path.

blueball The Feature Measure now supports CadEdges.

blueball The number of feature points that can be made along the axis of a hole or pin has been increased.

blueball The Direction type "Default" has been changed to "Auto."

blueball The Six Plane Move now has the "Auto" direction option for all the directions similar to the Step Plane move.

blueball Added Subtract function to Combination Measurement.

blueball Added Pair Pts Max - Min function to Two-Point List Measurement.

blueball Added HSF Color global modification setting under Part > HSF Color Settings > Choose Set all to HSF Surfaces.

blueball Added the ability to create point-based slots with Excel Linking.

blueball The DCSDB2 file for QDM Web DB can now be exported from 3DCS Analysis window.

blueball Importing DB2 files will now create points.

blueball Cmmdev and DB2 files now support Diameter measures with "_D" suffix.

blueball Added keyboard shortcut to reverse tree order.

blueball All user settings are now written to the config file and not the registry.

 

 

Analysis and Reporting

blueball Color Mapping icons added to the graphics toolbar.

blueball Color map lines drawing displays measurement simulation results of Out of Spec, 6STD or Cpk directly on geometry.

blueball Match Distance Move can now rotate the object pt to the closest position to the target point even if a solution is not found and routine fails.

blueball Feature move now treats a circle-associated-point as an Axis instead of a Plane.

blueball The Feature Measure now estimates the amount of interference if two features intersect.

blueball The Feature Measure reports a value of 0 if interference is detected but not calculated.

blueball For a measure used in a move's conditional logic, the Nominal value is now reported after all moves in its assembly level.

blueball When a tolerance uses a SMP file, it will now use values from the SMP file instead of the displayed range and offset in the HLM and GeoFactor analysis.

blueball Visualization Export export now supports measurement simulation result export.

blueball Visualization Export default settings are now set to FBX and Merge faces.

blueball Visualization Export now has "Export Affected Geometry Only for Nominal File" setting to minimize data set.

blueball The Visualization Export Importer now has re-sizable dialog boxes.

blueball Spec Study type now listed in tree.

blueball Spec Study now has Save and Show View buttons in dialog and tree.

blueball GeoFactor now exports  (to the CSV file) the refinement range of composite tolerances if displayed.

blueball All statistics can be displayed in Analysis Window with one button click.

blueball Batch Processor now contains the path for the 3DCS config file.

blueball Batch Processor now contains the path for the GeoFactor config file.

blueball Batch Processor now supports histogram .jpg generation.

blueball The FT&A callout highlights when showing sensitivity contributors from the Analysis window.

blueball Improved simulation engine performance for move floating.

blueball Added required Pp value option for Simulation results.

 

Appearance and Information

blueball When "Highlight Surfaces when Highlighting Parts"in the Display options is active, the part surfaces in the HSF file will highlight when the part is highlighted.

blueball Custom Cross Section option was added to the Graphic Properties toolbar.

blueball Feature lists for each part now expand and collapse when using Expand All/Collapse All commands.

blueball Information > MTM-GD&T list is now defaulted to moves.

blueball Information > MTM/GD&T dialog is now resizeable.

blueball The Condition column has been removed in the Points tab in Excel linking.

blueball The Frame number prefix on features in GDT callouts has been removed from contributors in the HLM and GeoFactor results.

blueball GD&T Size Callouts applied to multiple features now have the number of features listed in the displayed callout.

blueball Model opening speed has been improved.

blueball Improved CAD importing speed.

blueball Improved Performance of DCS Converter \ Reverse Selection command.

blueball Feature Information now reports control points used in dynamic points.

blueball Hide/Show dependency matrix for mesh and features is now available.

blueball "Remove Surface Styles" option added when applying Styles to Parts.

blueball Summaries, Log files, etc. now open with WordPad or NotePad based on the extension association.

blueball Added time stamp to the log file for CAD conversions.

blueball Log file message added for CAD parts without a saved color when imported and converted into hsf files.

blueball Added warning for confirmation when parts are selected to be deleted.  

blueball A warning is added when a DCS point has both an active DCS Size tolerance and an active Feature Size tolerance.

blueball Enhanced the warning message for saving over a output file when it is already open in Excel.

blueball Added Nonzero offset warnings for Composite tolerances and GDT.

 

Installation

blueball Option now added with install script to install CamStudio to record AVI video files.

blueball Installation script now includes an option to install WinMerge to compare differences between DCS Models via the ".dcsxml" file format.

blueball DCS XML Format (*.dcsxml) can now be used for comparing differences in models using WinMerge or a comparable solution.

 

Issues Fixed

redball Resolved slot/tab size not correctly deviating when the feature meshes don't correspond issue.

redball Resolved Pattern Rigid move creation crash issue.

redball Resolved "Report Not-Within Errors" setting activation issue.

redball Resolved GD&T size tolerance display issue when size tolerance is a double negative or a double positive issue.

redball Resolved Edit Point\Feature Point to DCS Point conversion requiring Apply button to be pressed twice issue.

redball Resolved Spec Study Influence Sphere false "failed to get CGR nodes from …" message issue.

redball Resolved Fast Animate with Move drop-down list not properly assembling components issue.

redball Resolved GD&T Info Summary button crash issue.

redball Resolved moving GD&T annotations causing a crash issue.

redball Resolved Plane Calc method setting issue.

redball Resolved Validation report displaying inactive floats in iteration move when validation setting is off issue.

redball Resolved Simulation freeze when screen saver or system lock issue.

redball Resolved part notes created within CATIA editor not displaying in Auto Generated Report issue.

redball Resolved Worst Case analysis status bar message issues.

redball Resolved parts not expanding/collapsing in tree issue.

redball Resolved Report Generated with "Hide Parts (Not in MTM)" hiding all the model parts issue.

redball Resolved picture of histogram in 3DCS Automated report not showing complete values issue.

redball Resolved model with mirrored parts not writing the correct transformation to DeltaGen issue.

redball Resolved Drag and Drop MTM's not moving the 1st item in the list issue.

redball Resolved empty tolerance list displaying in Navigation window issue.

redball Resolved importing .geo files from previous versions issue.

redball Resolved the Find Replace displaying GD&T as N/A issue.

redball Resolved Apply button in GD&T dialog not updating the graphics issue.

redball Resolved slot size and position GD&T not working for certain cases issue.

redball Resolved individual features potentially merging into one feature issue.

redball Resolved Sensitivity and GeoFactor not considering floating within Iteration Move loops issue.

redball Resolved Autobend on sharply curved surface issue.

redball Resolved GD&T feature list not automatically updating when a feature type is changed while the GD&T dialog is open issue.

redball Resolved composite tolerances not using a subtracted grouped range instead of an RSSed grouped range when the distribution is Constant, BiMode, UserDef, Step, or Modal to support Worst Case analysis issue.

redball Resolved not warning user that an output file cannot be saved when overwriting a file that is already open issue.

redball Resolved model with Spec Studies in sub not displaying in Visualization Export Export issue.

redball Resolved excessive find links for cad points with Facet Part Deviation setting active issue.

redball Resolved Feature move (plane1-axis2-plane3 case) error when plane3 is not perpendicular to plane1 and axis2 center is not on plane1 issue.

redball Resolved GeoFactor .csv files not displaying both distribution types if two were used in a composite tolerance issue.

redball Resolved Generate Report using OpenGL drivers issue.

redball Resolved Vector display when zooming issue.

redball Resolved DOE Form using half the range of GDT Size callouts issue.

redball Resolved SizeOnly Feature Tolerances not displaying the diametral range in the DOE files issue.

redball Resolved Cmmdev2 empty last line issue.

redball Resolved GeoFactor and DCSDB2 comma decimal delimiter issue.

redball Resolved duplicate point name creation issue.

redball Resolved MTM list selection scrolling to top of the list issue.

redball Resolved subordinate cylinder surfaces deviation issue.

redball Resolved GD&T Profile and Position both applied to a cylinder issue.

redball Resolved Estimated Percent Out calculation with Pearson VI curve type issue.

redball Resolved Preferences MTM Defaults tab display issue.

redball Resolved datum features selected in GD&T callouts applying location variation over-varying issue.

redball Resolved Position GD&T callouts not updating when orientation refinement is changed from the range value to zero issue.

redball Resolved Visualization Export sub assembly issue.

redball Resolved incorrect point vector when using Point on Solid issue.

redball Resolved Feature Derived Measure direction issues.

redball Resolved slot-tab floats displaying Rand#2 issue.

redball Resolved very long WTX file paths causing 3DCS to crash issue.

redball Resolved unnecessary error message appearing for certain orientation GDT issue.

redball Resolved excessive GD&T deviation for certain DRF cases [Plane-Axis 306 (Non-parallel and Non-Perpendicular) and 308 (Parallel)] issue.

redball Resolved point labels still appearing after using window delete issue.

redball Resolved Simulation Options not remembering the Name, Type and Text settings issue.

redball Resolved Linear Tolerance with Group mode and Multi. Scale active HLM and GeoFactor calculation issue.

redball Resolved bonus not being included in the sensitivity results for certain cylindrical features issue.

redball Resolved RunDOE DLL loading issue.

redball Resolved ability to delete DCS size tolerances from the Navigation window if their associated points have been turned into feature points issue.

redball Resolved creating feature points on CadEdge issue.

redball Resolved center feature points losing information because they are too close to another center feature point issue.

redball Resolved DCS GD&T not supporting the Group All Features setting in Size callouts in Range Control mode issue.

redball Resolved Measure Generator in the Feature-Feature mode not able to pick the same point twice issue.

redball Resolved the vectors of center feature points not updating if a GDT callout on its feature has an orientation range issue.

redball Resolved dimensional callouts between two cylinders or between one cylinder and one plane without an origin (origin set to middle) varying incorrectly issue.

redball Resolved flatness callouts not applying to the center plane of a slot or tab during the HLM and GeoFactor analysis issue.

redball Resolved HLM and GeoFactor not treating the origins of Dimensional callouts as permanent datums issue.

redball Resolved Rand#2 appearing if a Slot-Tab pair is the first float in a move.  All such floats will have their distribution reset to the default issue.

redball Resolved wrong message displayed when the DOE CSV file fails to save issue.

redball Resolved User Defined distribution for DCS size tolerance issue.

redball Resolved Load Management supporting file names with spaces issue.

redball Resolved the Current value in a point to nominal measure showing the coordinate value instead of zero before Nominal Build issue.

redball Resolved deleting in large models slow performance issue.

redball Resolved Translate \ Rotate prompt after Cloning issue.

redball Resolved importing CAD files with multi product and part instances issue.

redball Resolved Deviation slower then Sweep due to internal Triaxis drawing issue.

redball Resolved Copy Data not duplicating the MTM Saved View issue.

redball Resolved invalid GD&T diameter symbol display issue.

redball Resolved Morphy Move displaying part in separated position during deviation issue.

redball For an orientated dimensional callout (the origin is set) with a refinement, resolved the HLM analysis not using the RSSed ranges when the model is set to RSS method issue.

redball For an orientated dimensional callout (the origin is set) with a refinement, resolved the HLM not displaying the subtracted ranges when the model is set to Range Control method issue.

redball For an orientated dimensional callout (the origin is set) with a refinement, resolved GeoFactor not using the subtracted ranges when the model is set to Range Control method issue.

redball Resolved HLM and GeoFactor results when a slot or tab only has a size callout and the envelope principle is off issue.

redball Resolved the order an active DRF is applied in a GD&T callout issue.

redball Resolved the multiple direction being ignored when creating a new tolerance in Excel using the Merge option issue.

redball Resolved the multiple direction update when importing from Excel using the Merge option issue.

redball Resolved Gap/Flush Measure creation with active style sometimes causing 3DCS to "hang" issue.

redball Resolved GeoFactor and Sensitivity not using the "grouped" range and the refinement range when calculating the percent contributions for a composite Profile callout. The same ranges are still used for both the RSS method and the Range Control method issue.

redball Resolved scale warnings appearing for inactive measures issue.

Resolved GeoFactor not including bonus tolerance from Position callouts.

 

 

3DCS Variation Analyst, Multi-CAD 7.2.2.0 - May 2013

blueball 3DCS Variation Analyst Multi-CAD - Version 7.2.2.0 is now available on the Windows 7 and XP Pro win32 and win64 platforms.

 

Reporting

blueball Automated Reporting html page now has improved "Next" and "Previous" hyperlinks.

blueball Auto Report Generation MTM images now have option to zoom on the entire part or just the features in the routine.

blueball Auto Report Generation now can "Hide Parts" not in MTM's to clarify image.

blueball Auto Report Generation now has better status bar processing messsages.

blueball Enhanced the automatic Report generation for speed and ease of use.

blueball Updated names for User DLL and CM moves in the HTML Auto Report to show move type.

blueball User View added to the Spec Study dialog.

blueball 3DCS Spec Studies can now be seamlessly exported to Visualization Export.

 

Add-on Enhancements

blueball 3DCS Mechanical

blueball FEA Compliant

 

Enhancements

blueball Added Copy Window for Graphics, Navigation, Tree and Analysis windows.

blueball Updated MTM dialog OK, Apply, Cancel button positions.

blueball Improved Batch Processor MTM Import function.

blueball Added DCS Point Distribution type to Excel interface.

blueball Added .xlsm and .xlsb files support to Excel import.

blueball The interactive batch processor session automatically loads the compliant & mechanical modeler dll/license if needed.

blueball Find in model now has "Select Part" button.

blueball Save and Show View buttons in the Edit GD&T dialog allow saving and recalling used saved views.

blueball Feature Tolerance now defaults to Group Feature mode.

blueball Feature Wizard functionality was improved for ease of use

blueball Batch Processor now supports saving as Geofactor .csv format.

blueball 3DCS Simulation data can now be exported as a DCSDB2 .csv file through dcsCmmDevSaveHstToDcsDb2 (dcu_cmmdev2.dll).

blueball StiffGen now uses WordPad for viewing mesh and stiffness files.

blueball 3DCS installation script now includes all the prerequisites.

blueball Removed the Wireframe configuration for the 3DCS Analyst Preferences dialog.

blueball Updated MTM dialog Ok, Apply, Cancel button positions.

blueball Added on demand Addon license activation.

 

Issues Fixed

redball Resolved Analysis windows Size tolerance Offset value display issue.

redball Resolved part note deletion issue.

redball Resolved the styles crash issue when adding new style with Environment issue.

redball Resolved the Show Features third point display issue for Point to Point Measurement issue.

redball Resolved Automatic Reporting size tolerance displaying half the tolerance range issue.

redball Resolved the Automatic Report tolerance value display issue.

redball Resolved the Slot/Tab naming issue in the moves Summary page for float information issue.

redball Resolved Geofactor using default absolute / relative measure spec limits setting issue.

redball Resolved initial window position and display issue.

redball Resolved projected dynamic mid point projected as feature point display issue.

redball Resolved Feature Information display when a point is used for Slot/Tab issue.

redball Resolved missing data in mtm file issue.

redball Resolved Save as Raw data file name issue.

redball Resolved Copy Data crash with invalid feature issue.

redball Resolved simulation curve fit pearson 4 issue.

redball Resolved +/- symbol shows up as a question mark in the GD&T callouts when using Korean fonts issue.

redball Resolved MTM Defaults with Plus/Minus Tolerance Entry Mode issue.

redball Resolved Kinematic Simulation comma \ semicolon .csv regional settings issue.

redball Resolved User Dll displaying Mechanical routines issue.

redball Resolved Simu_fu.dll being listed in config file issue.

redball Resolved Preferences Validation default setting reset issue.

redball Resolved Virtual Clearance and Combination icon display in Measurement List issue.

redball Resolved Feature Position getting 2 random values issue.

redball Resolved DOE Form launch dcsRunDOE crash issue.

redball Resolved MTM change type display issue.

redball Resolved the xformMv.dll Project on Feature routine direction updating when failing to project point issue.

redball Resolved the HTML report histogram display issue when using slash symbol in measurement name issue.

redball Resolved Space Mouse button pop up issue.

redball Resolved the move dialog resizing issue for feature and part names display issue.

redball Resolved edge mesh crashing issue.

redball Resolved continuous Mesh Edge linking issue.

redball Resolved Style exporting all settings including images issue.

redball Resolved Automated Report image creation issue.

redball Resolved direct run simulation crash issue.

redball Resolved Automated Report cutting off vectors in image issue.

redball Resolved Move Options Tab and Slot float switched label issue.

redball Resolved the direction update issue in a new created step plane move issue.

redball Resolved Batch Processor cfg file and user DLL loading issue.

redball Resolved the Feature Move update features issue when move is created by changing the move type from Step Plane move issue.

redball Resolved Auto Report point label displaying during image capture issue.

 

 

3DCS Variation Analyst Multi-CAD 7.2.1.1 - November 2012

blueball 3DCS Variation Analyst Multi-CAD - Version 7.2.1.1 is now available on the Windows 7 and XP Pro win32 and win64 platforms.

 

Enhancements

blueball Help button was added to 'Delete Unused Info' dialog.

blueball Updated Simulation and Sensitivity default settings.

blueball Replace, Size Tolerance, Pick Vector, and Switch Vector buttons are grayed-out for feature points in Edit Point dialog.

blueball Automatic IGES file importing by using a CSV file to preserve the tree structure functionality added.

 

Issues Fixed

redball Resolved 3DCS Mechanical issues.

redball Resolved rotated Slot \ Pin clearance HLM calculation issue.

redball Resolved Automated Excel Report dependency on MS Word issue.

redball Resolved Vector display in report issue.

redball Resolved Set Simulation \ Total Runs values reverting to initial value when changing directory issue.

redball Resolved Generate Report with Excel "Server Busy" issue.

redball Resolved "Import CAD .csv" file OK button display issue.

redball Resolved Batch Processor utilizing number of runs and seed from model issue.

redball Resolved Automated Report Tolerance image overlap in Excel issue.

redball Resolved Excel Import .xlsm support issue.

redball Resolved crash issue when a CATIA part is selected to be loaded with Load Management, instead of an hsf file issue.

redball Resolved Feature Information dialog text display issue.

redball Resolved the Step Plane move Object part names display issue.

redball Resolved the view creation in separate instead of nominal position issue.

redball Resolved Feature Point projection dialog lock up issue.

redball Resolved confusing Move "Pick Part" message to say "Select part to add move" issue.

redball Resolved Model auto-loading crash when license is not available issue.

redball Resolved the GD&T information import into Multi-CAD issue.

redball Resolved hsf file missing data issue.

redball Resolved dcu_xform.dll dcsTranslatePtByMeas with multiple points selected issue.

redball Resolved multiple point in same location selection issue.

redball Resolved Center Feature Point exporting to .geo file issue.

redball Resolved Feature move apply button issue.

redball Resolved Feature mode changes affecting tolerance settings issues.

redball Resolved the More button functionality in the User DLL dialog issue.

redball Resolved measure current value display with invalid input issue.

redball Resolved Reporting inactive circle size issue.

redball Resolved Export to Excel \ Color Worksheet cell color issue.

redball Resolved AAO crash for model with composite linear tolerances with only one random value issue.

 

 

3DCS Variation Analyst Multi-CAD 7.2.1.0 - October 2012

blueball 3DCS Variation Analyst Multi-CAD - Version 7.2.1.0 is now available on the Windows 7 and XP Pro win32 and win64 platforms.

blueball 3DCS Installation script now includes CAD translators, Redistributables and GD&T font.

 

Major Enhancements

blueball 3DCS Automated Report Generation.

blueball 3DCS Mechanical Configuration & Add-In.

blueball Advanced Analyzer/Optimizer Enhancements.

blueball FEA Compliant Enhancements.

blueball Analysis Batch Mode can now be directly ran from 3DCS.

blueball Spec Study functionality is now included with Analyst license.

blueball The 3DCS Variation Analyst SA is now called 3DCS Variation Analyst Multi-CAD to emphasize the support for multiple CAD file types.

 

New and Updated Routines

blueball User-Defined tolerance distributions now load SMP files from the beginning for each simulation.

blueball New Automated Report Generation function added to the Analysis toolbar.

blueball Save View and Show View functions for automated report generation have been added to MTM's in their dialogs and in their RH-click menus.

blueball Excel Linking now displays Feature of Size for features used in the MTM's.

blueball Measurement Generator now has a filter to include only tolerance and move points in the creation of new measures.

blueball New tab was added to the Excel Linking file to exporting the Spec Study information to Excel.

blueball The strings from the DLLs are now exported to and imported from Excel.

blueball CMM-DEV2 now supports random sequencing for each CMM data point.

blueball Added Assembly Sequence and Trend Study to Analysis Batch mode.

blueball Improved the Analysis Batch Mode error message when DOERUN is not proceeded by a DCSLOAD command.

blueball Added CMM-DEV Position and Direction routine to modify features position and direction consistency with measurement data.

blueball Added File Utility to the dcsMfcUtilFunctions routine (dcu_mfc_fn.dll) to save a 7.2 wtx file back to 7.1. After saving, the graphics file (ext=.dcs_gfx) needs manual-copy-over.

blueball The new Automated Report Generation is now available under dcu_simu_fn.dll (dcsReportGen).

blueball The Calculate Global Displacement routine in CM now supports generating Abaqus input deck with the displacement boundary conditions for color mapping and further analysis in solver.

blueball Custom Cross Section option, now available under View/Cross Section menu, allows setting section to a specific location/orientation.

blueball Model Information icon was added to DCS Tools toolbar. The user now can verify the saving history of the model.

 

 

New Modeling Options

blueball Feature Slots can now be defined from points.

blueball Added Orientation mode in the Feature tolerance.

blueball Move Float Angle can now be easily set by using a vector.

blueball Measurement between a point and a feature and between a curve and a surface can be now created with Feature Measure.

blueball The Switch Vectors button was added to the Edit Point dialog box.

blueball Bonus tolerance now calculated for group patterns of features having different size tolerances.

blueball GD&T annotations now move with part animation.

blueball Points can now be easily edited by using the RH menu to access the Edit point dialog.

blueball Delete Unselected and Reverse Selections options are now available in DCS Converter under the Edit/Selection menu..

blueball Added new options to reset X, Y, Z cross sections under the View menu.

blueball Edit Point dialog now supports selecting points from the Navigation window.

 

Enhancements

blueball Added progress bar to Animation dialog.

blueball Model Summary (previously Model Log) is now edited in MS Word.

blueball Condition and Interference move setting are now available in the Excel sheet when using the Export to Excel function.

blueball 3DCS versions are now suffixed win32 for 32 bit Windows versions and win64 for 64 bit Windows versions.

blueball Validation now indicates if a Slot does not have features in opposite directions.

blueball DCS Log file now contains temp, help, report, config and backup directory information.

blueball Load DLL dialog is now resizable and has a Summary button.

blueball Default width of the Load DLL dialog is now wider so entire dll path can be seen.

blueball Edit Point dialog now has a Copy function that allows creating a copy right below the selected point.

blueball The Measure Equation Summary page includes the String List for ease of use.

blueball Runout no longer affects the cylinder size when Range Control deviation is set.

blueball Selected point are shown automatically from Edit point Option.

blueball Now the size tolerances are displayed in the MTM Information dialog.

blueball The Feature Wizard now displays only the features listed under the branched-in part.

blueball Added browse buttons to the Simulation and Sensitivity analysis files.

blueball Information MTM & GD&T dialog is enhanced.

blueball The 'Save simulation data to HTML format' dialog was updated.

blueball Improved Performance of Opening models with lots of hsf files.

blueball Copy and paste capabilities were added in the Edit Point dialog, using the right-click mouse button.

blueball <F2> function now allows renaming the currently selected item in Navigation window.

blueball The new copy of any MTM is now going to be created right below the copied MTM.

blueball Edit GD&T dialog has been updated with a Switch To functionality similar to the other MTMs.

blueball Simplified the pick feature process for MTMs.

blueball IGES file importing now ignores the multibody flag to prevent the creation of one hsf file per feature.

blueball The HolePinPair is not matched warning has been removed.

blueball The assembly structure is now better supported when importing CAD files.

blueball DCS Converter now supports importing Abaqus .inp files.

blueball Added highlighting when GD&T is selected in the Edit GD&T dialog.

blueball Added highlighting when a feature tolerance is selected in the navigation window.

blueball Preselect Highlighting of features is now supported when mousing over graphics.

blueball Extra Default direction type removed from Step Plane move.

blueball Now step plane move primary directions are parallel when using associated direction, for ease of use.

blueball The Feature Measure dialog is now resizable.

blueball The MTM Defaults for tolerance settings under Preferences were revised and enhanced for ease of use.

blueball The Object and Target Features fields are now resizable within the MTM dialogs, to allow the user to view the complete feature names.

blueball Prismatic Joint feature areas were increased to better display the feature names.

blueball Model Information under DCS Toolbar was updated with model path information.

 

New Settings

blueball Visualization default settings updated.

blueball Geofactor Validate is now default on.

blueball Preferences dialog box now has the option to reset to default settings.

blueball Stiffness Generator now automatically supports Abaqus format changes for versions 6.11 and prior.

blueball Part notes are now supported for each assembly or part in the DCS Storage tree. Previous model notes will be loaded into Part notes.

blueball Added Process DB capability for DCS GD&T.

blueball File arrowDCS Open now supports .geo files.

blueball Feature Labels and Direction Vectors are now automatically displayed in black or white based on background color.

blueball Analysis Show Sensitivity setting is now default on.

blueball Show/Hide now only has two settings, grey mode has been removed.

blueball Updated Move Clone features interface.

    blueball Toolbar icons now maintain last selected icon on top.

    blueball Removed the Deform DCS CGR setting from the DCS Preferences.

    blueball The Feature Selection dialog is now skipped unless <Alt> button is pressed.

    blueball Measurements in Analysis Windows can now be quickly found by using the Search option in the Goto dialog.

blueball Deviation icon now displays as on\off button.

blueball New RH-click menu "Reframe On" and "Center Graph" commands aid in finding DCS data in the Graph and Navigation windows.

blueball 3DCS now supports file server installation in addition to client installation.

blueball The GD&T Dev Method default is RSS.

blueball MTM On-Off Settings dialog is now resizable.

blueball The feature slots/tabs now display their size along with the name.

blueball A warning message for hole/pin floating was added for unsupported distributions, when running Geo Factor.

blueball Now the Geo Factor displays the software version used to run it.

blueball Translate/Rotate dialog now supports wild cards for point name searching.

blueball Simulation Options for Histogram now has Axis On/Off settings.

blueball Status bar now displays the path of the "moused-over" file in the File menu list for the recently opened files.

blueball User Defined Distribution now displays the file path to the *.smp file in the Summary.

blueball Suffix and Prefix fields are now supported in the Clone function.

blueball Feature Measure \ Feature to Feature with missing target features generates warning message for the NB and Validate run log.

blueball Updated DCS Preference \ Delete Backup files from 3 to 10 days.

blueball Uncheck the Set Random Part Color option in TM Options dialog to avoid random color hsf creation.

 

Obsolete Features

greyball The Show button was removed from Edit Point dialog; is now obsolete since the selected points are directly shown in the graphic.

greyball "Retain Transformation in HSF" option was removed from the Preferences dialog due to lack of use.

greyball Removed Advanced Visualization check box in Pref \ Config since this functionality is now supported with 3DCS-MC license.

 

Issues Fixed

redball Resolved the Write Run Log deactivation in Preferences dialog issue.

redball Resolved the Coincidence mechanical move feature removing issue.

redball Resolved GD&T leader line drawing issue.

redball Resolved importing sub assembly .wtx crash issue.

redball Resolved Feature Point \ U and V display issue.

redball Resolved Feature Point \ Grid Point \ Show Point issue.

redball Resolved Feature Point \ Grid Point \ Show Point issue.

redball Resolved Report Directory not getting saved in config file issue.

redball Resolved the blank spaces found in tolerance dialog issue, after deleting points listed in the tolerance issue.

redball Resolved DCS GD&T \ Type dropdown maintaining type issue.

redball Resolved Point Group being able to select feature points issue.

redball Resolved MTM\GDT Information display size and scroll issue.

redball Resolved MTM dialog maintaining size issue.

redball Resolved DOS window display after launching 3DCS issue.

redball Resolved TransMagic DOS window display when translating files issue.

redball Resolved unclosable error message in Edit Feature Pts dialog.

redball Resolved the ProjPtOnFeat routine in the Xform DLL not working with multiple or non-AssocDir vectors issue.

redball Resolved Center Feature point losing circle issue.

redball Resolved Composite Profile with RSS mode issue.

redball Resolved crash when applying force in part level issue.

redball Resolved reaction force calculation(user dll measure routine) when an aset is toleranced issue.

redball Resolved FEA CM Force Measurement value reset issue.

redball Resolved hsf file loading crash issue.

redball Resolved Edit Point dialog column size maintaining issue.

redball Resolved the direction change issue for a cylindrical feature issue.

redball Resolved Backup date at month end issue.

redball Resolved the issue with Feature point dialog box when letters given to the u and v value.

redball Resolved Feature moves with slot used as a secondary locator and a hole used as a tertiary locator are now better supported.

redball Resolved Angularity material modifier display issue.

redball Resolved Feature of Size (Hole, Pin, Slot, Tab) identification issue.

redball Resolved Feature Move with two center axis are too close issue.

redball Resolved Orientation GD&T with non-planar feature issue by adding a warning in validation and nominal build.

redball Resolved blank line in Tolerance after deleting a feature in Tree issue.

redball Resolved the GD&T angularity callout G Factor and HLM contribution issue.

redball Resolved size variation issue for a profile callout on a cylinder when using the Range Control setting.

redball Resolved the GD&T surface profile contribution issue when the form refinement is zero.

redball Resolved creating half cylinders issue.

redball Resolved the pattern move failed assemblies calculation issue due to the random number seed change during simulation.

redball Resolved Model Report Directory not existing issue.

redball Resolved the copy measurement issue when copying multiple measurements simultaneously.

redball Resolved Stiffgen not displaying default Young's modulus value for Nastran and Abaqus.

redball Resolved CadEdges unselectable in Navigation window issue.

redball Resolved Center Feature point with circle diameter display issue.

redball Resolved DCS GD&T resetting form and orientation when renaming issue.

redball Resolved Force Measurement calculation not warning user when DCS points don't have linked ASET points and cause calculation issue.

redball Resolved Datum as defined by a set of holes flipping the DRF issue.

redball Resolved Feature highlighting when selecting Feature in Navigation Window.

redball Resolved Import DCS file with Replace option move type issue.

redball Resolved Show Hide GD&T from Navigation Window crash.

redball Resolved DOE_Form \ Save As file type 1.0 CSV crash issue.

redball Resolved point creation on sections and vector lines issue.

redball Resolved Geofactor html Arc tolerance radian display issue.

redball Resolved the printing issue for electronic HTML one page report.

redball Resolved the feature point loosing circle diameter when updated issue.

redball Resolved the points reordering issue in the On-Off Point Control dialog, when using Switch To function.

redball Resolved the Geo Factor font size related display issue.

redball Resolved the feature point repositioning issue in the Feature point dialog.

redball Resolved the Analysis window resizing issue when using Autoscale function.

redball Resolved the histogram offset from the spec limits display issue.

redball Resolved DCS Converter temp dir and log file issues.

redball Resolved the GD&T orientation control deviation application onto the surf direction not surface position issue.

redball Resolved the display issue for Range/Offset prefix in Sensitivity's Summary page.

redball Resolved the Linearity column manipulation issue in Geo Factor.

redball Resolved DCS Converter \ Batch Converting of CAD and Mesh files in one selection issue.

redball Resolved DCS Converter \ "Done Converting n of x of CAD Files" count issue.

redball Resolved the autoscale display issue for hsf files created from cgr files.

redball Resolved Navigation Window printing issue.

redball Resolved Edit Point switching a Hole to a Pin issue.

redball Resolved Edit Point drag and drop display issue.

redball Resolved dcs3d.cfg / dcs4d.cfg config file naming issue.

redball Resolved creating point in the deviated position issue, by copying the deviated position of a reference point using Screen Position option.

redball Resolved the model separation when deleting a feature point in built position issue.

redball Resolved hsf deformation issue for compliant parts during Animation when skipping moves with the drop-down.

redball Resolved the lights color adjusting issue.

redball Resolved DCS Mesh Control / Add Feat Point by Picking on Surface not working on transformed geometry issue.

redball Resolved Run DOE comma patch issue.